High Speed Swivel Sorters for Parcel Sorting at Airport
High-performance line splitting even with diverse, sensitive loads
Greatly reduced gaps between the loads thanks to extremely low
Gentle product handling
Extremely compact with no projecting components
Can be adapted optionally to alternating splitting tasks
Specification of Swivel Wheel Sorter
|Name||Swivel Wheel Sorter|
|Voltage||48VDC / 380V / 415V, 220V / 380V / 415VAC|
|Dimension(L*W*H)||610mm*688mm*800mm or Customized|
|Material||Stainless Steel/Carbon Steel|
|Material Feature||Fire Resistant|
|Structure||Line Wheel Diverter|
|Power||750W or Customized|
|Width||480, 580, 680, 780,980,1080mm|
|Length||510mm + 100 x numbers of module|
|Sorting capacity||4,000 PPH or Customized|
|Sorting orientation:||forward, right and left|
|Min. parcel size||100 x 100 x 10mm|
|Max. parcel size||1200 x 800 x 800mm|
|Loading size||max. 800mm x 1,200mm x 800mm|
|min. 100mm x 100mm x 10mm|
|Noise||less than 75dB|
|After-sales Service Provided||Free spare parts, Engineers available to service machinery overseas|
Wheel Sorter Catalogue
■ Environment temperature: -50 ~ 45℃
■ Relative humidity: 20 ~ 95%
■ The site does not allow the medium with explosive danger, and the
surrounding medium should not contain corrosion metal and
destroying insulation gas and conductive medium.
The wheel diverting sorter is mainly composed of polyurethane
wheels, driven motor, O belts, control cabinet and other
components. It uses thrust ball bearing inside to switch the
direction. Polyurethane wheels, O belts, U supporting form the
pendulum mechanism. The wheels and O belts supply the straight
driving force. The connecting rods and thrust ball bearings supply
the switching force for left and right sorting so as to achieve
two-way diverting, so the goods can be sorted.
1) Wheel diverting sorter: supply driven force for the parcel
2) Carbon steel plate: the mechanical structure of the equipment.
3) Wheels: made of polyurethane, then precisely processed. They are
the key parts of the conveying and diverting.
4) O belts: made of polyurethane, the main part of transmission.
5) Motor: driven force
6) Gravity roller: increase the smooth moving.
This equipment is used for the occasions of sorting, diverting and
conveying together. Can be used with conveyors, scanning and
weighing and WCS software.
Installation and commissioning
All parts are driven by connecting rods, easy to assemble,
interchangeable and universal.
The installation and commissioning of the equipment are required to
operate by our professional and technical personnel or the
operaters authorized by our company. Equipment must be installed
with matched mounting brackets. Forklift or crane will be used to
move the equipments to place it in the designated location.Make
sure the equipment aligns and all fasteners are installed firmly.
After the main structure of the equipment is installed, then start
to install the electrical control components. All the equipment has
an independent control cabinet, connected with the main equipment
by communication bus standard and fast joints to ensure the fast
and accurate installation.
After finishing installation, start to connect the software and
test. It can be used with independent system or with other systems.
Mechanical part: Routine inspection of the drive shaft, make sure
there is enough oil in the bearing. It is necessary to clean up the
surface dust and dirt regularly to ensure the smooth operation of
Electric part: Daily inspection of electrical components in the
control cabinet to prevent the leakage of mouse biting or water